Lures

Salty Snack 80s “lipless”

OMOROL® Salty Snack 80S “minnow” is a sinking resin jerkbait 100% handcrafted, which reproduces for size and characteristics a forage fish.

The sinking feature allows the lure to swim at different depths and to be worked with precision, making it suitable for catching any predator fish in the sea, estuary and lagoon, simulating a prey on the run or dying.

The center of gravity is placed in the back half and allows to reach excellent launch distances despite the low mass of the bait. Moreover, the flat sides let this lure to perform a very attracting rolling during the jerking action, which combines perfectly with the tight and frequent wobbling in the straight recovery phase.

The use of the “circuit board lip” is specially designed to face the continuous collisions against rocks on shallow waters, in order to be able to practice a more aggressive fishing action. Details are very accurate and the protection of the livery is ensured by an epoxy finish.

– Proudly Made in Italy –

 

 

IMPORTANT: our minnows are tested one by one before being packed. Anyway if the lure doesn’t swim straight after a collision, it takes just a few seconds to recalibrate it.

If the minnow runs to the right (or left) slightly bend the head eye to the left (or right) with the pliers, looking at the lure frontally.


Salty Snack 80s “lipless”

OMOROL® Salty Snack 80S “lipless” is a sinking resin pencil bait 100% handcrafted, which reproduces for size and characteristics a forage fish.

The sinking feature allows the bait to work at different depths and its characteristic “S” movement makes it suitable for attracting any type of marine predator on straight recoveries in still or slow waters, simulating a fish that swims undisturbed.

The center of gravity is positioned in the middle of the lure and together with the flat sides allows to perform a very empathic rolling during the horizontal fall, reproducing the typical movement of a dying prey that falls towards the seabed.

The absence of lip and the slim shape ensure stability in flight, in order to make long and accurate casts. Details are very realistic and the painting is protected by an epoxy finish.

– Proudly Made in Italy –

 


Trout Snack 80s “minnow”

OMOROL® Trout Snack 80S “minnow” is a sinking resin jerkbait 100% handcrafted, which reproduces for size and characteristics a forage fish.

The sinking feature allows the lure to swim at different depths and to be worked with precision, making it suitable for catching trout and other predators in the river, stream and lake, simulating a prey on the run or dying.

The center of gravity is placed in the back half and allows to reach excellent launch distances despite the low mass of the bait. Moreover, the flat sides let this lure to perform a very attracting rolling during the jerking action, which combines perfectly with the tight and frequent wobbling in the straight recovery phase.

The use of the “circuit board lip” is specially designed to face the continuous collisions against rocks on shallow waters, in order to be able to practice a more aggressive fishing action. Details are very accurate and the protection of the livery is ensured by an epoxy finish.

– Proudly Made in Italy –

 

 

IMPORTANT: our minnows are tested one by one before being packed. Anyway if the lure doesn’t swim straight after a collision, it takes just a few seconds to recalibrate it.

If the minnow runs to the right (or left) slightly bend the head eye to the left (or right) with the pliers, looking at the lure frontally.


Trout Snack 55s “lipless”

OMOROL® Trout Snack 80S “lipless” is a sinking resin pencil bait 100% handcrafted, which reproduces for size and characteristics a forage fish.

The sinking feature allows the bait to work at different depths and its characteristic “S” movement makes it suitable for attracting trouts and other predators on straight recoveries in still or slow waters, simulating a fish that swims undisturbed.

The center of gravity is positioned in the middle of the lure and together with the flat sides allows to perform a very empathic rolling during the horizontal fall, reproducing the typical movement of a dying prey that falls towards the bottom.

The absence of lip and the slim shape ensure stability in flight, in order to make long and accurate casts. Details are very realistic and the painting is protected by an epoxy finish.

– Proudly Made in Italy –

 


Teuthis

OMOROL® Teuthis is a sinking resin pencil bait 100% handcrafted, which reproduces the features of a small cephalopod, prey appreciated by all marine predators.

The sinking feature allows the lure to work at different depths and its particular wobbling on straight recoveries makes it suitable for attracting predators just below the surface.

The center of gravity is placed in the back half and allows the bait to reach excellent casting distances. Moreover, thanks to this weight distribution, recovering the lure with short jerks you can imitate perfectly the rhythmic swimming of a cephalopod and attract all kinds of predators throughout the water column.

The appearance of the Teuthis is very realistic and the protection of painting is guaranteed by an epoxy finish.

– Proudly Made in Italy –

 


Salty Snack 55s “minnow”

OMOROL® Salty Snack 55S “minnow” is a sinking resin jerkbait 100% handcrafted, which reproduces for size and characteristics a small forage fish.

The sinking feature allows the lure to swim at different depths and to be worked with precision, making it suitable for catching any predator fish in the sea, estuary and lagoon, simulating a small prey on the run or dying.

The center of gravity is placed in the back half and allows to reach excellent launch distances despite the low mass of the bait. Moreover, the flat sides let this lure to perform a very attracting rolling during the jerking action, which combines perfectly with the tight and frequent wobbling in the straight recovery phase.

The use of the “circuit board lip” is specially designed to face the continuous collisions against rocks on shallow waters, in order to be able to practice a more aggressive fishing action. Details are very accurate and the protection of the livery is ensured by an epoxy finish.

– Proudly Made in Italy –

 

 

IMPORTANT: our minnows are tested one by one before being packed. Anyway if the lure doesn’t swim straight after a collision, it takes just a few seconds to recalibrate it.

If the minnow runs to the right (or left) slightly bend the head eye to the left (or right) with the pliers, looking at the lure frontally.


Salty Snack 55s “lipless”

OMOROL® Salty Snack 55S “lipless” is a sinking resin pencil bait 100% handcrafted, which reproduces for size and characteristics a small forage fish.

The sinking feature allows the bait to work at different depths and its characteristic “S” movement makes it suitable for attracting any type of marine predator on straight recoveries in still or slow waters, simulating a small fish that swims undisturbed.

The center of gravity is positioned in the middle of the lure and together with the flat sides allows to perform a very empathic rolling during the horizontal fall, reproducing the typical movement of a dying prey that falls towards the seabed.

The absence of lip and the slim shape ensure stability in flight, in order to make long and accurate casts. Details are very realistic and the painting is protected by an epoxy finish.

– Proudly Made in Italy –

 


Trout Snack 55s “minnow”

OMOROL® Trout Snack 55S “minnow” is a sinking resin jerkbait 100% handcrafted, which reproduces for size and characteristics a small forage fish.

The sinking feature allows the lure to swim at different depths and to be worked with precision, making it suitable for catching trout and other predators in the river, stream and lake, simulating a small prey on the run or dying.

The center of gravity is placed in the back half and allows to reach excellent launch distances despite the low mass of the bait. Moreover, the flat sides let this lure to perform a very attracting rolling during the jerking action, which combines perfectly with the tight and frequent wobbling in the straight recovery phase.

The use of the “circuit board lip” is specially designed to face the continuous collisions against rocks on shallow waters, in order to be able to practice a more aggressive fishing action. Details are very accurate and the protection of the livery is ensured by an epoxy finish.

– Proudly Made in Italy –

 

 

IMPORTANT: our minnows are tested one by one before being packed. Anyway if the lure doesn’t swim straight after a collision, it takes just a few seconds to recalibrate it.

If the minnow runs to the right (or left) slightly bend the head eye to the left (or right) with the pliers, looking at the lure frontally.


Trout Snack 55s “lipless”

OMOROL® Trout Snack 55S “lipless” is a sinking resin pencil bait 100% handcrafted, which reproduces for size and characteristics a small forage fish.

The sinking feature allows the bait to work at different depths and its characteristic “S” movement makes it suitable for attracting trouts and other predators on straight recoveries in still or slow waters, simulating a small fish that swims undisturbed.

The center of gravity is positioned in the middle of the lure and together with the flat sides allows to perform a very empathic rolling during the horizontal fall, reproducing the typical movement of a dying prey that falls towards the bottom.

The absence of lip and the slim shape ensure stability in flight, in order to make long and accurate casts. Details are very realistic and the painting is protected by an epoxy finish.

– Proudly Made in Italy –

 


HammerJig

OMOROL® HammerJig is a small casting jig 100% handmade reproducing in size and features a bait fish, irresistible prey for predators of all sizes.

The name of this lure comes from the fact that its internal lead core is meticulously crafted with hammer to get optimal shape and attitude in water.

Details are very accurate and the protection of the livery is ensured by an epoxy finish.

The center of gravity is concentrated in the back and along with the bullet shape allows this artificial to achieve considerable distances and play, while retrieving linear, the typical movement of a bait fish on the run.

On jerked or sawtooth recovery, instead, the HammerJig performs showy skids, producing strong flash by using reflective liveries.

On the drop, the lure follows an irregular line reproducing perfectly the flicker of a dying fish that falls to the bottom.

This metal jig is completed by a strong and reliable OMOROL® Crystal Assist, wich is handcrafted as well, that warrants easy and safe strikes.

– Proudly Made in Italy –

 

NOTE: our HammerJigs are designed to make the best used as they are. We do not recommend the use of hooks, trebles and assist hooks on the rear eye of the 5-7-10 grams models. If you want to use the rear eye, we suggest to prefer the 18 and 25 grams models.


Kiwi 35F

OMOROL® Kiwi 35F is a small shallow crankbait floating type that reproduces the clumsy and frenetic swimming of a forage fish, irresistible prey for predators of all sizes in both fresh and salt water.

The name of this lure is derived from its chubby and funny shape, that allows it to move a lot of water despite its small size.

Casting distances are satisfactory considering the profile and the small weight, while the use of the assists ensures functional advantages in avoiding to get stuck on the bottom and warrant easy and safe strikes.

The colors are bright and the protection of the livery is ensured by an epoxy finish.

– Hand painted and tuned in Italy –


Lucky 80SF

OMOROL® Lucky 80SF is a slow floating type finesse jerkbait which has all the key features that a lure of its kind should have.

Slim body, 45 degrees lip and great casting distances make it suitable for catching both fresh and salt water predators.

Casting distances are great thanks to a internal weights transfer system, while the use of the assists ensures functional advantages in avoiding to get stuck on low backdrops and warrant easy and safe strikes.

The colors are bright, details are very cared and the protection of the livery is ensured by an epoxy finish.

– Hand painted and tuned in Italy –


Calypso Egi “DICHROIC SERIES”

OMOROL® Calypso “DICHROIC SERIES” is a special edition characterized by the use of a particular fabric that changes color according to the angle of light. Moreover, the body has on the back some lightly “glow in the dark” white bands. The change of color takes place during the jerking phase and this represents an irresistible invitation to attack for the cephalopods.

OMOROL® Calypso is a resin filled squid jig, handcrafted and inspired by the aesthetics and technical functionality of modern egi, excellent for fishing any kind of cephalopod, especially squid, due to its perfect balance and the specific features.

The particular silhouette of Calypso is definitely more slim compared to the classical model of squid jigs so it can cut through the water better especially during jerking.

The special colors of Capypso, as well as for Karidea, are one of its strengths and come from the combination of the basic holographic finishing and the overlying cloth, very silky and with a perfect texture.

Calypso mounts sharp hooks of last generation, dark and round bended, mounted “on crossed crowns” (crowns are mounted in such a way that the needles of the upper crown cover the empty spaces left by those of the lower crown), which improves grip on the strike, and reduces the chances of losing the prey during landing phase.

The squid jig is completed by soft and durable rooster feathers, tridimensional glow eyes and a point of phosphorescence behind hooks.

– Proudly Made in Italy –

 

NEWS: Calypso won the Lure Building Contest n. 1/2016 organized by the famous magazine “La Pesca Mosca e Spinning” (read full news).


Karidea Egi

OMOROL® Karidea is a premium handmade wooden squid jig, a really unique product due to its particular features, excellent for fishing cuttlefish and squid both inshore and offshore thanks to its perfectly balanced structure.

The look is deliberately inspired by the tradition of the great Japanese masters of egi building: the wood used is in fact a typical variety of the Asian tradition, much more durable and waterproof than ordinary balsa. Also the use of the lanyard is a clear reference, while remaining on modern materials as reliable 55 lb Japanese rope.

The particular colors of Karidea are one of its strengths and come from the combination of the basic holographic finishing and the overlying cloth, very silky and with a perfect texture.

Karidea mounts classical model hooks excellently performing because of mounting “on crossed crowns” (crowns are mounted in such a way that the needles of the upper crown cover the empty spaces left by those of the lower crown), which improves grip on the strike, and reduces the chances of losing the prey during landing phase.

The squid jig is completed by soft and durable rooster feathers, tridimensional glow eyes and a point of phosphorescence behind hooks.

– Proudly Made in Italy –


Calypso Egi

OMOROL® Calypso is a resin filled squid jig, handcrafted and inspired by the aesthetics and technical functionality of modern egi, excellent for fishing any kind of cephalopod, especially squid, due to its perfect balance and the specific features.

The particular silhouette of Calypso is definitely more slim compared to the classical model of squid jigs so it can cut through the water better especially during jerking.

The special colors of Capypso, as well as for Karidea, are one of its strengths and come from the combination of the basic holographic finishing and the overlying cloth, very silky and with a perfect texture.

Calypso mounts sharp hooks of last generation, dark and round bended, mounted “on crossed crowns” (crowns are mounted in such a way that the needles of the upper crown cover the empty spaces left by those of the lower crown), which improves grip on the strike, and reduces the chances of losing the prey during landing phase.

The squid jig is completed by soft and durable rooster feathers, tridimensional glow eyes and a point of phosphorescence behind hooks.

– Proudly Made in Italy –

 

NEWS: Calypso won the Lure Building Contest n. 1/2016 organized by the famous magazine “La Pesca Mosca e Spinning” (read full news).

Utilizzando il sito, accetti l'utilizzo dei cookie da parte nostra. maggiori informazioni

Questo sito utilizza i cookie per fonire la migliore esperienza di navigazione possibile. Continuando a utilizzare questo sito senza modificare le impostazioni dei cookie o cliccando su "Accetta" si acconsente al loro utilizzo.

Chiudi